Definitions

Message Definitions

clearpath_control_msgs/ControlMode.msg

# Control mode message

int8 NEUTRAL=0
int8 MANUAL=1
int8 AUTONOMY=2

int8 mode

clearpath_control_msgs/ControlSelectionState.msg

# The complete state of the control selection module. This message includes the autonomy state as well as the navigation mode.

ControlState autonomy
ControlMode mode

clearpath_control_msgs/ControlState.msg

# The autonomy state message, The autonomy can be either enabled/disabled and active/paused.

bool enabled
bool paused

clearpath_dock_msgs/DockInfo.msg

# Message definition containing the information of a single dock. This includes identifiers, lat/lon and orientation of the location of a dock.

string name
string uuid
string frame
string target_template

# ISO 8601 date/time format of last successfull dock location setting
string last_location_set_time

# maximum allowable distance to allow for predocking. (ie. the distance within which the dock waypoint must be located)
float32 max_predock_distance
# the distance from the dock that the robot will navigate to prior to start docking
float32 predock_distance

# location of the dock
float64 latitude
float64 longitude
float64 heading

clearpath_dock_msgs/DockProperties.msg

# Message definition containing the properties for each of the docks available.

clearpath_dock_msgs/DockInfo[] docks

clearpath_dock_msgs/DockState.msg

# Message definition containing information on what state the docking process is in.

uint8 UNDOCKED = 0
uint8 DOCKED = 1
uint8 IN_PROGRESS = 2
uint8 FAILED = 3
uint8 CANCELLED = 4

uint8 state

clearpath_dock_msgs/TargetTrackerState.msg

# Message definition containing the state information of the target tracker.
# This includes whether or not the tracker is active, whether the target is visible/lost, and the target pose and score of that pose.

bool active

# flag indicates if the target is visible or not
bool target_locked

geometry_msgs/PoseWithCovarianceStamped target_pose
float32 score

# the distance of the sensor_link to the dock target
float64 distance_to_target

clearpath_localization_msgs/LocalizationStatus.msg

# Localization status message for all sources of localization

std_msgs/Header header
float32 accuracy # IN DEVELOPMENT

# status information related to the GPS receiver units
GNSSStatus position_gnss
GNSSStatus heading_gnss
GNSSStatus base_station_gnss

bool dead_reckoning

clearpath_localization_msgs/GNSSStatus.msg

# GNSS receiver status message

uint8 POSITION_RECEIVER = 0
uint8 HEADING_RECEIVER = 1
uint8 BASE_STATION_RECEIVER = 2
uint8 receiver_type

uint8 POSITION_NO_FIX = 0
uint8 POSITION_SPP = 1
uint8 POSITION_SBAS = 2
uint8 POSITION_RTK_FLOAT = 3
uint8 POSITION_RTK_FIXED = 4
uint8 position_fix_type

uint8 HEADING_NOT_APPLICABLE = 0
uint8 HEADING_NO_SOLUTION = 1
uint8 HEADING_RTK_FLOAT = 2
uint8 HEADING_RTK_FIXED = 3
uint8 heading_fix_type

uint8 num_connected_sats  # Number of satellites connected to the antenna/receiver
uint8 num_sats_solution   # Number of sats used in solution
float32[] cn0             # The carrier-to-noise ratio of each connected satellite
float64 correction_age    # Age of RTK corrections. -1 indicates none received

clearpath_mission_manager_msgs/msg/StorageState.msg

# The entire contents of the Mission database
# Note that all of the following cases are valid:
# - a Task can be referenced in multiple Waypoints
# - a Waypoint can be referenced in multiple Missions
# - a Waypoint can be orphaned (i.e. not included in any Missions)
# - a Task can be orphaned (i.e. not included in any Waypoints)

# All missions defined in the database
clearpath_navigation_msgs/Mission[] missions

# All waypoints defined in the database
clearpath_navigation_msgs/Waypoint[] waypoints

# All tasks defined in the database
clearpath_navigation_msgs/Task[] tasks

clearpath_mission_scheduler_msgs/msg/NextSchedule.msg

# The ID of the next schedule to start
# Empty if nothing is scheduled
string uuid

# The time until the schedule starts (rounded to the nearest second)
duration time_to_start

clearpath_mission_scheduler_msgs/msg/Schedule

# Single-execution mode; the schedule starts at the designated time and runs once
uint8 MODE_ONCE=0

# Looping mode; the schedule starts at the designated time, and every loop_interval seconds after
# for the designated number of repeats
uint8 MODE_LOOP=1

# Single-shot execution, but does NOT get added to the persistent storage
# Equivalent to MODE_ONCE, but for one-off, throw-away schedules (e.g. "Run X in 5 minutes")
uint8 MODE_TRANSIENT=2

# The human-readable name for this schedule
# Should be unique, but there's no hard requirement for it to be so
string name

# The unique ID of this schedule
# A string of the form "12345678-90ab-cdef-1234-567890abcdef"
string uuid

# The time that this mission starts every day
clearpath_mission_scheduler_msgs/UtcTime start_time

# Either MODE_ONCE or MODE_LOOP to indicate the execution mode
uint8 mode

# In MODE_LOOP, how many times do we repeat the missions?
uint8 loop_repeats

# In MODE_LOOP, how long do we wait between executions?
duration loop_interval

# The ordered list of Mission UUIDs to execute
string[] mission_ids

# The minimum battery charge needed before we execute the missions
# Must be in the range 0-1
float32 min_battery

# If the missions take longer than this to execute, assume the schedule has failed and alert the user
# Set to zero to disable the timeout
duration timeout

# Is this schedule enabled?
# Only enabled schedules will execute
bool enabled

clearpath_mission_scheduler_msgs/msg/StorageState.msg

# Single-execution mode; the schedule starts at the designated time and runs once
uint8 MODE_ONCE=0

# Looping mode; the schedule starts at the designated time, and every loop_interval seconds after
# for the designated number of repeats
uint8 MODE_LOOP=1

# Single-shot execution, but does NOT get added to the persistent storage
# Equivalent to MODE_ONCE, but for one-off, throw-away schedules (e.g. "Run X in 5 minutes")
uint8 MODE_TRANSIENT=2

# The human-readable name for this schedule
# Should be unique, but there's no hard requirement for it to be so
string name

# The unique ID of this schedule
# A string of the form "12345678-90ab-cdef-1234-567890abcdef"
string uuid

# The time that this mission starts every day
clearpath_mission_scheduler_msgs/UtcTime start_time

# Either MODE_ONCE or MODE_LOOP to indicate the execution mode
uint8 mode

# In MODE_LOOP, how many times do we repeat the missions?
uint8 loop_repeats

# In MODE_LOOP, how long do we wait between executions?
duration loop_interval

# The ordered list of Mission UUIDs to execute
string[] mission_ids

# The minimum battery charge needed before we execute the missions
# Must be in the range 0-1
float32 min_battery

# If the missions take longer than this to execute, assume the schedule has failed and alert the user
# Set to zero to disable the timeout
duration timeout

# Is this schedule enabled?
# Only enabled schedules will execute
bool enabled

clearpath_mission_scheduler_msgs/msg/UtcTime.msg

# Represents a moment in time on a 24-hour clock

# The hour, 0-23
uint8 hour

# The minute, 0-59
uint8 minute

# The second, 0-59
uint8 second

# Milliseconds, 0-999 (not typically needed)
uint16 millisecond

clearpath_navigation_msgs/Mission.msg

# Message definition for an OutdoorNav mission

std_msgs/Header header

# The human-readable name of this mission
string name

# A UUID string used to uniquely identify this mission
string uuid

# The ordered list of Waypoints that make up the mission
clearpath_navigation_msgs/Waypoint[] waypoints

# Configuration parameters for the mission
# Additional details TBD
string onav_config

clearpath_navigation_msgs/DistanceToGoal.msg

# Message includes Euclidean and Path distance to goal

float32 euclidean
float32 path

clearpath_navigation_msgs/Metrics.msg

# Message containing some metric information related to the autonomy metrics.

float64 total_distance_travelled    # [m]
float64 total_duration              # [s]

uint64 num_missions_sent
uint64 num_missions_completed
uint64 num_replans
uint64 num_recoveries
uint64 num_tasks_executed

clearpath_navigation_msgs/MotionState.msg

# Motion state message to indicate the current motion, expected motion and the direction of travel of the robot.

# State pertaining to current motion of the robot.
uint8 MOTION_NORMAL=10
uint8 MOTION_STOPPED=11
uint8 MOTION_REVERSE=12
uint8 MOTION_SLOWING=13 # Currently unused
uint8 motion

# State pertaining to the robot's movement along the path. Predictive, ie state
# will be INDICATOR_LEFT_TURN if in or approaching a left turn.
uint8 INDICATOR_NORMAL=20
uint8 INDICATOR_LEFT_TURN=21
uint8 INDICATOR_RIGHT_TURN=22
uint8 INDICATOR_CLOCKWISE=23
uint8 INDICATOR_COUNTERCLOCKWISE=24
uint8 INDICATOR_HAZARD=25 # Currently unused
uint8 indicator

# Direction of travel of the robot relative to its physical forward direction.
uint8 DIRECTION_FORWARD=30
uint8 DIRECTION_REVERSE=31
uint8 direction

clearpath_navigation_msgs/NavigationState.msg

# Message containing the current navigation state(s). Navigation may be in multiple states.

uint8 STATE_IDLE = 0
uint8 STATE_COMPUTE_PATH = 1
uint8 STATE_EXECUTE_PATH = 2
uint8 STATE_REPLAN = 3
uint8 STATE_NAVIGATING_AROUND_OBSTACLE = 4
uint8 STATE_RECOVERY = 5
uint8 STATE_LOST = 6
uint8 STATE_DONE = 7
uint8 STATE_SAFETY_STOP = 8
uint8 STATE_PAUSE = 9
uint8 STATE_DISABLE = 10

uint8[] states

clearpath_navigation_msgs/OdomIntent.msg

# Message containing current and predicted odom related information

std_msgs/Header header

# Current and predicted odom
perception_navigation_msgs/Odom2DLean odom
perception_navigation_msgs/Odom2DLean predicted_odom

# Time offset corresponding to prediction
float32 dt

clearpath_navigation_msgs/PointVector.msg

# Vector of point vectors (for GUI)
std_msgs/Header header

clearpath_navigation_msgs/Vector2D[] cloud

clearpath_navigation_msgs/Progress.msg (BETA)

# Message containing the completion percentage of the currently executed path and the current goal.

float32 path_progress
float32 goal_progress
float32 mission_progress

clearpath_navigation_msgs/ScanPoints.msg

# Message definition for the detection points used by the navigation that relate to the detected obstacles.

std_msgs/Header header

string[] frames_vector
clearpath_navigation_msgs/PointVector[] cloud_vector

clearpath_navigation_msgs/Task.msg

# A single task that can be executed at a Waypoint

# The human-readable name of this task
string name

# A UUID string to uniquely identify this Task
string uuid

# The ROS action that this task executes
string action_server_name

# The version of this task
string version

# Numerical/boolean data to be passed to the action_server_name
# The exact meaning of these values is dependent on the underlying service
float64[] floats

# String data to be passed to the action_server_name
# The exact meaning of these values is dependent on the underlying service
string[] strings

# Boolean value which determines whether a mission using this task can continue
# if this task fails to execute
bool allow_failure

clearpath_navigation_msgs/TrackError.msg

# The path error message containing the off-path cross track error and the relative heading error to the path direction

std_msgs/Header header
float32 cross_track_error
float32 heading_error

clearpath_navigation_msgs/Vector2D.msg

# 2D Vector of floats (used for GUI)

float32[2] point

clearpath_navigation_msgs/Waypoints.msg

# A single Waypoint along a Mission

# A UUID string to uniquely identify this Waypoint
string uuid

# The human-readable name of this Waypoint
string name

# The latitude (in degrees) of this Waypoint
float64 latitude

# The longitude (in degrees) of this Waypoint
float64 longitude

# The compass heading (in degrees) of this Waypoint
float64 heading

# A radius in meters indicating the acceptable radius from the target location
# Posititon tolerance is disabled if this value is negative
float64 position_tolerance

# A tolerance in degrees indicating the acceptable deviation from the heading
# Heading tolerance is disabled if this value is negative
float64 yaw_tolerance

# The ordered set of Tasks to execute once the goal position & orientation are reached
clearpath_navigation_msgs/Task[] tasks

clearpath_platform_msgs/PlatformID.msg

# Platform ID message containing the model, serial #, hardware and firmware versions

string model
string serial_id
string hardware_revision
string firmware_revision

clearpath_safety_msgs/Safety.msg

# Safety monitor message telling us if the safety monitor has been triggered and a message
# indicating what caused the trigger

uint8 SAFETY_ESTOP = 0
uint8 SAFETY_SENSOR_TIMEOUT = 1

bool safety_monitor_triggered
uint8 trigger_type
string message

clearpath_safety_msgs/WatchdogStatus.msg

# Watchdog status message containing information related to sensor monitoring, emergency stop and safety stops

bool[] gps_watchdog_triggered
bool[] lidar_watchdog_triggered
bool[] camera_watchdog_triggered

Standard ROS Messages

• actionlib_msgs/GoalID
• diagnostic_msgs/DiagnosticArray
• geometry_msgs/PolygonStamped
• geometry_msgs/Polygon
• geometry_msgs/PoseArray
• geometry_msgs/Twist
• nav_msgs/OccupancyGrid
• nav_msgs/Odometry
• nav_msgs/Path
• sensor_msgs/Imu
• sensor_msgs/LaserScan
• sensor_msgs/NavSatFix
• sensor_msgs/PointCloud2
• std_msgs/Bool
• std_msgs/Empty
• std_msgs/String
• tf2_msgs/TFMessage
• wireless_msgs/Connection

---

Service Definitions

clearpath_control_msgs/srv/SetControlMode.srv

# Service definition to set the control mode

clearpath_control_msgs/ControlMode mode
---

clearpath_dock_msgs/srv/AddDock.srv

# A dock information message that will be added to the docks list
clearpath_dock_msgs/DockInfo dock
---
# True if the location was updated/added successfully, otherwise False
bool success

clearpath_dock_msgs/srv/RemoveDock.srv

# A dock information message that will remove a dock from the docks list
string uuid
string name
---
# True if the dock was removed successfully, otherwise False
bool success

clearpath_dock_msgs/srv/SetDockLocationById.srv

# The UUID of the dock we're setting a location for
# If empty, a new dock is to be added with the location
string uuid
---
# True if the location was updated/added successfully, otherwise False
bool success

clearpath_dock_msgs/srv/SetDockLocationByName.srv

# The UUID of the dock we're setting a location for
# If empty, a new dock is to be added with the location
string name
---
# True if the location was updated/added successfully, otherwise False
bool success

clearpath_localization_msgs/srv/SetDatum.srv

# Service definition to set the datum with a latitude (lat) and longitude (lon)

float32 lat
float32 lon
---
bool success

clearpath_localization_msgs/srv/ResetLocalization.srv

# Service definition to reset the localization

bool require_gnss
uint32 gnss_samples
---
bool success

clearpath_mission_manager_msgs/srv/AddRemoveById.srv

# The UUID of the object we're inserting/removing
# When removing, all instances with this UUID are deleted from the parent
string uuid

# The UUID of the parent object
string parent_uuid

# The zero-based index to insert the object into
# Ignored when removing
int32 position
---
# True if the object was added/removed successfully, otherwise False
bool ok

clearpath_mission_manager_msgs/srv/CloneMission.srv

# The UUID of the mission to clone
string uuid

# The new name for the mission
# If blank, the old mission name will be re-used with -copy appended to the end
string new_name

# If true, the order of the waypoints within the cloned mission are reversed
bool reverse
---
# The Mission with the given ID, or null if no Mission with that ID exists
clearpath_navigation_msgs/Mission mission

note

The reverse parameter was added in 0.9.0

clearpath_mission_manager_msgs/srv/CreateMission.srv

# The desired name for the new mission
string name

# The additional configuration options
# see clearpath_mission_manager_msgs/msg/Mission for details
string onav_config

# The ordered list of Waypoint UUIDs to include in this mission
string[] waypoint_ids
---
# The resulting Mission, with an auto-generated UUID is returned
clearpath_navigation_msgs/Mission result

clearpath_mission_manager_msgs/srv/CreateTask.srv

# The desired name for the Task
string name

# The ROS Action to invoke to execute the task
string service_call

# The version of the task
string version

# The numerical arguments to pass to the service_call
float64[] floats

# The string arguments to pass to the service_call
string[] strings

# Optional list of Waypoint UUIDs to assign this task to automatically
# The new task will be appended to the end of the existing Waypoints
string[] assign_to
---
# The resulting Task with an auto-generated UUID is returned
clearpath_navigation_msgs/Task result

clearpath_mission_manager_msgs/srv/CreateWaypoint.srv

# The desired name for the Waypoint
string name

# The latitude for the Waypoint in degrees
float64 latitude

# The longitude for the Waypoint in degrees
float64 longitude

# The compass heading in degrees for the Waypoint
float64 heading

# The position tolerance for the Waypoint in meters
float64 position_tolerance

# The orientation tolerance for the Waypoint in degrees
float64 yaw_tolerance

# Optional ordered list of Task UUIDs to execute at this Waypoint
string[] task_ids

# Optional list of Mission UUIDs to assign the new Waypoint to
# The new Waypoint is appended to the end of the existing Missions
string[] assign_to
---
# The resulting Waypoint with an auto-generated UUID is returned
clearpath_navigation_msgs/Waypoint result

clearpath_mission_manager_msgs/srv/DeleteById.srv

# The UUID of the object we want to delete
string uuid
---
# True if the item was successfully deleted, otherwise False
bool ok

clearpath_mission_manager_msgs/srv/DeleteEverything.srv

# Used to permanently delete everything from the database.
# Use this service at your own risk

# This must be set to true to confirm you really want to delete everything
bool yes_i_am_absolutely_sure_i_want_to_do_this
---
# True if the database was cleared, otherwise False
bool ok

clearpth_mission_manager_msgs/srv/DeleteMultiple.srv

# A list of UUIDs of items we want to delete
string[] uuids
---
# A list of UUIDs that we were asked to delete, but failed to
string[] failed_uuids

clearpath_mission_manager_msgs/srv/ExportData.srv

---
# A JSON string representing the database contents.
# This can be written to a file or used with the ImportData.srv
# to back-up/restore the database contents
string data

clearpath_mission_manager_msgs/srv/GetAllMissions.srv

---
# An array of all Missions defined in the database
clearpath_navigation_msgs/Mission[] missions

clearpath_mission_manager_msgs/srv/GetAllTasks.srv

---
# The array of all Tasks defined in the database
clearpath_navigation_msgs/Task[] tasks

clearpath_mission_manager_msgs/srv/GetAllWaypoints.srv

---
# The array of all Waypoints defined in the database
clearpath_navigation_msgs/Waypoint[] waypoints

clearpath_mission_manager_msgs/srv/GetEverything.srv

---
# All Missions, Waypoints, and Tasks defined in the database
clearpath_mission_manager_msgs/StorageState state

clearpath_mission_manager_msgs/srv/GetMission.srv

# The UUID of the Mission we want to retrieve
string uuid
---
# The Mission with the given ID, or null if no Mission with that ID exists
clearpath_navigation_msgs/Mission mission

clearpath_mission_manager_msgs/srv/GetTask.srv

# The UUID of the Task we want to retrieve
string uuid
---
# The Task with the given ID, or null if no Task with that ID exists
clearpath_navigation_msgs/Task task

clearpath_mission_manager_msgs/srv/GetWaypoint.srv

# The UUID of the Waypoint we want to retrieve
string uuid
---
# The Waypoint with the given ID, or null if no Waypoint with that ID exists
clearpath_navigation_msgs/Waypoint waypoint

clearpath_mission_manager_msgs/srv/ImportData.srv

# A JSON string representing the database contents.
# This is the same as the data output by the ExportData service, and is intended
# to be used to restore the database to a previous state
string data
---
# The state of the database after importing the data
clearpath_mission_manager_msgs/StorageState state

clearpath_mission_manager_msgs/srv/ImportMission.srv

# The Mission to import. All UUIDs will be re-generated
clearpath_navigation_msgs/Mission mission
---
# The generated mission with new UUIDs
clearpath_navigation_msgs/Mission mission

clearpath_mission_manager_msgs/srv/UpdateMission.srv

# The UUID of the mission we want to edit
string uuid

# The human-readable name for the Mission
string name

# The configuration parameters for the Mission
string onav_config

# The ordered list of Waypoint UUIDs to include in the Mission
string[] waypoint_ids
---
# The edited Mission, or null if no mission with the given ID exists
clearpath_navigation_msgs/Mission result

clearpath_mission_manager_msgs/srv/UpdateTask.srv

# The UUID of the Task to edit
string uuid

# The human-readable name for the Task
string name

# The ROS Action that the Task executes
string service_call

# The version of the Task
string version

# The numerical data to pass to the service_call
float64[] floats

# The string data to pass to the service_call
string[] strings
---
# The edited Task, or null if no Task with the given ID exists
clearpath_navigation_msgs/Task result

clearpath_mission_manager_msgs/srv/UpdateWaypoint.srv

# The UUID of the Waypoint to edit
string uuid

# The human-readable name for the Waypoint
string name

# The latitude of the Waypoint in degrees
float64 latitude

# The longitude of the Waypoint in degrees
float64 longitude

# The compass heading of the Waypoint in degrees
float64 heading

# The Waypoint's position tolerance in meters
float64 position_tolerance

# The Waypoint's orientation tolerance in degrees
float64 yaw_tolerance

# The ordered list of Task UUIDs to execute at this Waypoint
string[] task_ids
---
# The edited Waypoint, or null if no Waypoint with the given ID exists
clearpath_navigation_msgs/Waypoint result

clearpath_mission_scheduler_msgs/srv/CloneSchedule.srv

# The UUID of the schedule to clone
string uuid

# The name for the new copy of the schedule
string new_name
---
# The cloned schedule
# This should be identical to the original, but with a new name and new UUID
clearpath_mission_scheduler_msgs/Schedule schedule

clearpath_mission_scheduler_msgs/srv/CreateSchedule.srv

# The human-readable name for this schedule
# Should be unique, but there's no hard requirement for it to be so
string name

# The time that this mission starts every day
clearpath_mission_scheduler_msgs/UtcTime start_time

# Either Schedule.MODE_ONCE, Schedule.MODE_LOOP, OR Schedule.MODE_TRANSIENT to indicate the execution mode
uint8 mode

# In MODE_LOOP, how many times do we repeat the missions?
uint8 loop_repeats

# In MODE_LOOP, how long do we wait between executions?
duration loop_interval

# The ordered list of Mission UUIDs to execute
string[] mission_ids

# The minimum battery charge needed before we execute the missions
# Must be in the range 0-1
float32 min_battery

# If the missions take longer than this to execute, assume the schedule has failed and alert the user
# Set to zero to disable the timeout
duration timeout

# Is this schedule enabled?
# Only enabled schedules will execute
bool enabled

---

# The created mission, as-saved on disk
clearpath_mission_scheduler_msgs/Schedule result

clearpath_mission_scheduler_msgs/srv/EnableSchedule.srv

# The ID of the schedule to enable/disable
string uuid

# Should this schedule be enabled or disabled?
bool enable

---

# True if we successfully enabled/disabled the schedule
# False if there was an error or the schedule wasn't found
bool ok

clearpath_mission_scheduler_msgs/srv/ExportData.srv

---
# A JSON string representing the database contents.
# This can be written to a file or used with the ImportData.srv
# to back-up/restore the database contents
string data

clearpath_mission_scheduler_msgs/srv/GetAllSchedules.srv

---
clearpath_mission_scheduler_msgs/Schedule[] schedules

clearpath_mission_scheduler_msgs/srv/GetNextSchedule.srv

---
# The ID of the next schedule to start
# Empty if nothing is scheduled
string uuid

# The time until the schedule starts (rounded to the nearest second)
duration time_to_start

clearpath_mission_scheduler_msgs/srv/GetSchedule.srv

string uuid
---
clearpath_mission_scheduler_msgs/Schedule schedule

clearpath_mission_scheduler_msgs/srv/ImportData.srv

# A JSON string representing the database contents.
# This is the same as the data output by the ExportData service, and is intended
# to be used to restore the database to a previous state
string data
---
# The state of the database after importing the data
clearpath_mission_scheduler_msgs/StorageState state

clearpath_mission_scheduler_msgs/srv/UpdateSchedule.srv

# The ID of the mission to edit
string uuid

# The human-readable name for this schedule
# Should be unique, but there's no hard requirement for it to be so
string name

# The time that this mission starts every day
clearpath_mission_scheduler_msgs/UtcTime start_time

# Either Schedule.MODE_ONCE, Schedule.MODE_LOOP, OR Schedule.MODE_TRANSIENT to indicate the execution mode
uint8 mode

# In MODE_LOOP, how many times do we repeat the missions?
uint8 loop_repeats

# In MODE_LOOP, how long do we wait between executions?
duration loop_interval

# The ordered list of Mission UUIDs to execute
string[] mission_ids

# The minimum battery charge needed before we execute the missions
# Must be in the range 0-1
float32 min_battery

# If the missions take longer than this to execute, assume the schedule has failed and alert the user
# Set to zero to disable the timeout
duration timeout

# Is this schedule enabled?
# Only enabled schedules will execute
bool enabled

---

# The modified mission, as-saved on disk
clearpath_mission_scheduler_msgs/Schedule result

clearpath_navigation_msgs/srv/SetDelayCompensation.srv

# Service definition to enable/disable the delay compensation feature. If enabling, the delay to compensate for must be specified in the request.

bool enable_delay_compensation
uint16 delay                    # units: milliseconds
---
bool success
string message

clearpath_navigation_msgs/srv/SetPathSmoother.srv

# Service definition to enable/disable the path smoothing feature. If enabling, minimum turning radius must be specified in the request.

bool enable_path_smoother
float32 turn_radius         # units: meters
float32 step_size
---
bool success
string message

clearpath_navigation_msgs/srv/SetStopDistance.srv

# Service definition to enable/disable the stop distance. If enabling, the stop distance must be specified in the request.

bool enable_stop_distance
float32 stop_distance      # units: meters
---
bool success
string message

Standard ROS Services

• std_srvs/Empty
• std_srvs/SetBool

---

Action Definitions

clearpath_dock_msgs/action/Dock.action

# Action definition for sending a Clearpath UGV to one of its charging dock.

# goal
string uuid
bool local_mode
---
# result
bool success
---
# feedback
string state

# the distance of the charger_link to the dock target
float64 distance_to_dock

clearpath_dock_msgs/action/Undock.action

# Action definition for undocking a Clearpath UGV from one of its charging docks.

# goal
string uuid
---
# result
bool success
---
# feedback
string state

# the distance of the charger_link to the dock target
float64 distance_to_dock

clearpath_localization_msgs/action/SurveyBaseStation.action

# Action definition for surveying the base station

# goal
# the number of GPS fixes that will be used to compute to surveyed position
uint32 number_of_desired_fixes
---
# result
bool success
---
# feedback
# current progress, as a percentage, of the surveying
float32 percent_complete

clearpath_mission_scheduler_msgs/action/RunScheduleByUuid.action

# Action definition for executing a schedule on-demand
# Potentially only useful for debugging

# The UUID of the schedule to execute
string uuid

# Wait this long before starting the schedule (ros:Duration msg, so the units are secs/nsecs)
duration delay 
---
# Did the schedule terminate successfully?
bool success
---
# The ID of the mission we're executing right now
string current_mission_uuid

# One of "waiting" or "executing" indicating what the schedule is doing
string state

clearpath_navigation_msgs/action/ExecuteMissionByUuid.action

# Action definition for executing a mission by uuid

# goal
string uuid # UUID of The mission being executed

# from_start = True -> Forces the mission to execute from the beginning
bool from_start

# If from_start = False, mission will be executed from the waypoint with UUID specified.
# If from_start = False and no start_waypoint_uuid is specified then autonomy will pick the closest waypoint
string start_waypoint_uuid
---
# result
bool success
---
# feedback
string state

clearpath_navigation_msgs/action/Mission.action

# Action definition for sending a mission to the Clearpath OutdoorNav software

# goal
clearpath_navigation_msgs/Mission mission

# from_start = True -> Forces the mission to execute from the beginning
bool from_start

# If from_start = False, mission will be executed from the start_waypoint specified.
# If from_start = False and no start_waypoint is specified then autonomy will pick the closest waypoint
clearpath_navigation_msgs/Waypoint start_waypoint
---
# result
bool success
---
# feedback
string state