Skip to main content

Axis F1035-E

Item Numbers

DescriptionCPR ItemSales KitInstallation Kit, With Fasteners
Axis F1035-E sensor020068027105027212
Axis F34 controller hub020442027634027633


Mass, Camera96 g
Mass, Hub238 g
Voltage, MinimumPoE, 8 V
Voltage, MaximumPoE, 28 V
Voltage, SensorPoE, 24 V
Power, Average12.6 W
DataEthernet, 100 Mbit/s
View, Horizontal194°
View, Vertical113°
Ingress Protection, Solids, Camera6
Ingress Protection, Liquids, Camera7
Ingress Protection, Solids, Hub2
Ingress Protection, Liquids, Hub0
Operating Temperature, Min0°C
Operating Temperature, Max40°C

Software Bringup

This sensor is included in the Clearpath Robotics System Image that is installed on all our robots. This allows you to add or remove the sensor from your robot's software description by changing the environment variables in /etc/ros/setup.bash.

Refer to your robot's Description README file for more details:

Your robot's Tutorials page describes how the Clearpath Robotics System Image is installed and configured:


Clearpath is committed to your success. Please get in touch with us and we will do our best to get you rolling again quickly:

To get in touch with a salesperson regarding Clearpath Robotics products, please email

If you have an issue that is specifically about ROS and is something which may be of interest to the broader community, consider asking it on If you do not get a satisfactory response, please ping us and include a link to your question as posted there. If appropriate, we will answer in the ROS Answers context for the benefit of the community.

Further Reading

  1. Datasheet, Camera
  2. Datesheet, Hub
  3. Dimensions, Camera
  4. Dimensions, Hub
  5. User Manual
  6. Axis website
  7. ROS webpage